ATEN Master View CS-82A User Manual page 12

M
Auto Scan Mode:
The CS-82A's Auto Scan feature automatically switches
between the two computers at regular intervals so that you can
monitor their activity without having to take the trouble of
switching yourself.
Invoking Auto Scan
To invoke Auto Scan Mode, press and simultaneously release
the left Shift key, then press and release the right Shift key:
[Left Shift] [Right Shift].
Setting the Scan Interval
The default amount of time that Auto Scan dwells on each port
is five seconds. You can change the scan interval at any time
while Auto Scan Mode is in effect by keying in a number from 1
to 4. The scan interval that corresponds to the number is shown
in the table below:
Number
Scan Interval
1
3 secs
2
5 secs
3
10 secs
4
20 secs
2003-11-25
- 10 -