Cleaning & Maintenance; Trouble Shooting; General Information - Bionaire BOF3001-CN Instruction Leaflet

C L E A N I N G / M A I N T E N A N C E
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap and water solution.
2. NEVER use abrasive or flammable solvents to clean the
unit.
3. After cleaning, be sure to completely dry the unit with a
cloth or towel.
NOTE: THE FINS ARE PERMANENTLY SEALED
AND DO NOT REQUIRE ANY OIL CHANGE.
CAUTION: DO NOT ALLOW WATER TO RUN
INTO THE INTERIOR OF THE HEATER AS THIS
COULD CREATE A FIRE OR ELECTRIC SHOCK
HAZARD, DAMAGING THE UNIT.
AUTO SAFETY SHUT-OFF
When a potential overheat temperature is reached, the
system will automatically shut the heater off.
Tip Over Shut-Off:
When the unit is accidentally knocked over, it will instantly
shut off. The unit may also shut off if it is moved or bumped.
To reset, simply place the heater in an upright position, and it
will operate normally.
NOTE: If unit does not turn on when placed in the upright
position, press the Mode Button (Mode) on the control panel
and heater will resume operation.
HEATER STORAGE
1. Store heater unit with cord in a cool, dry location.
2. We recommend storing the unit and cord in the
original package.

TROUBLE SHOOTING

General Information:

Environmental Factors - There are a number of factors
that will affect your desired comfort level. These factors
can include insulation, open or drafty doors and windows,
and outside temperature. Please check and take action if
any of these potential problems are affecting your
heaters ability to adequately warm your room.
Supplemental Heat - Portable electric heaters are
intended for supplemental heating of rooms to heat the
room you are in and turn down the central heat
thermostat. They are not intended to replace central
heating systems.
Do NOT attempt to repair or adjust any electrical
or mechanical functions on this heater. Doing so
will void warranty. The inside of the heater
contains no user serviceable parts. All servicing
should be performed by qualified personnel only.