White Mountain Hearth DVCX(36,42)FP30(N,P)-2 Installation Instructions And Owner's Manual page 2

Direct vent zero clearance gas fireplace heater
Table of Contents

Advertisement

1.
Read the safety information on Pages 64 - 65.
2.
If located in the Commonwealth of Massachusetts, please note the special requirements on Page 66.
3.
Where are you going to install the unit? See Pages 8-10 & 14.
4.
Frame the opening. See Page 16.
5.
Install the gas lines. See Page 13.
6.
Install the wiring. See Pages 15, 46, and 53.
7.
Install the venting. See Pages 11-12.
8.
Install the fireplace. See Pages 16-19.
9.
Connect the gas. See Page 13.
10. Connect the electricity. See Page 15.
11. Connect the venting system. See Page 20.
12. Install the optional remote system. See Page 46 for Millivolt Systems and Page 52 for Intermittent Pilot Systems.
13. Install the logs. See Page 32 - 43.
14. Light the fireplace and troubleshoot. See Pages 47 - 48 for Millivolt Systems and 54 - 57 for Intermittent Pilot Systems.
15. Install trim and other accessories. See Page 7.
16. Show the homeowner how to operate the fireplace.
17. Show the homeowner how to do the basic maintenance.
Page 2
BEFORE YOU START
35009-2-1015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvcx(36,42)fp70(n,p)-2

Table of Contents