Accessory Parts And Parts To Be Procured Locally - Toshiba RAV-SM562CT-E Installation Manual

Accessory parts and Parts to be procured locally

r Accessory parts
Part name Q'ty
Owner's Man 1
ual
Installation Manual 1 This manual
1
Installation pattern
Thermal insulation
2
pipe
Washer 4 M10 × Ø25
Hose band 2
<Separate sold parts>
Part name Q'ty
1
Standard wired
remote controller
r Parts to be procured locally
Connecting pipe (Liquid side)
(6.4mm (diam.), Nominal (diam.) 1/4" thick 0.8mm)
RAV-SM562CT-E
(9.5mm (diam.), Nominal (diam.) 3/8" thick 0.8mm)
RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Connecting pipe (Gas side)
(12.7mm (diam.), Nominal (diam.) 1/2" thick 0.8mm)
RAV-SM562CT-E
(15.9mm (diam.), Nominal (diam.) 5/8" thick 1.0mm)
RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Power supply cord
2.5mm² (H07RN-F or 60245IEC66) (20m or less)
3.5mm² (AWG-12) (70m or less)
Shape Usage
— —
—
Drawing-out port of
—
hanging bolt pipe
For thermal insulation of
pipe connecting section
For holding down unit
For connecting drain
pipe
Shape Usage
CODE No.
SET DATA SETTING TEST
UNIT No.
R.C. No. Model
H
TEMP. ON / OFF
RBC-AMT32E
TIMER SET FAN MODE
TIME SWING/FIX VENT
FILTER
RESET TEST SET CL UNIT
Part name Q'ty
Drain hose 1
Bushing 1
Thermal insulator 1
Thermal insulator
1
of top plate
Banding band 2
Connecting wire (indoor and outdoor wire)
H07RN-F or 60245IEC66 (1.5mm² or more)
Thermal insulation for refrigerant pipe
(10mm or more, thermal insulating foam polyethylene)
Thermal insulation for drain pipe
(10mm or more, foam polyethylene)
Drain pipe (Outer 26mm (diam.)) (VP20)
Tapes
1
Shape Usage
For connecting drain pipe
For protection of edge at
power taking-in port
For thermal insulation of drain
hose (10t × 200 × 200)
For upper pipe hole of indoor
unit (6t × 130 × 160)
For prevention of open of
drain hose thermal insulator