Oki ML420 Maintenance Manual page 79

No. Item
Gap between the con-
tact and the monitor
42113931TH Rev.1
Specification
Adjust lever
0.3mm or more
Drawing
Contact
Motor PCB
Touching
Oki Data CONFIDENTIAL
Adjustment method
Confirm followings.
Make sure that the
gap between the con-
tact and the motor
PCB is 0.3 mm or
more.
0.3mm
or more
At the time of printing
test, make sure that
the contact touches
the motor PCB and it
becomes reduced
speed mode when the
adjust lever is set to
range 2 and 4.
79 /