Oki ML420 Maintenance Manual page 14

(2) Universal Serial Bus (USB)
Universal Serial Bus Specification Revision 2.0 (Full speed) compliance.
1) Connector
• Printer Side
• Cable Side
2) Cable
• Cable Length
Note: Cable is not supplied.
3) Table of USB I / F signals
4) Connector pin arrangement
5) Mode & Class of Device
• Full - speed Driver
• Self - powered Device
6) Data Signaling Rate
• Full - speed function - 12Mb/s ± 0.25%(2500ppm)
7) Interface circuit
42113931TH Rev.1
: "B" Receptacle (Upstream Input to the USB Device)
: Series "B" Plug
: Approx 1.8m (A cable must be met USB Spec Rev 1.1 for
normal operation)
Contact Signal Name
Number
1 Vbus
2 D -
3 D +
4 GND
Shell Shield
2 1
3 4
SOC
Typical Wiring
Assignment
Red
White
Green
Black
Drain Wire
+3.3V
D+
D-
Oki Data CONFIDENTIAL
14 /