Main Specifications; System Requirements For Usb Connection - Roland iModela iM-01 Master Manual

Main Specifications

Material that can be cut
X, Y, and Z operation strokes
Distance from collet tip to table
Table size
M o u n t a b l e c u t t i n g m a t e r i a l
weight
X-, Y-, and Z-axis drive system
Operating speed
Software resolution
Mechanical resolution
Spindle motor
Interface
Control command set
Power supply conditions
Power consumption
Operating noise
External dimensions
Weight
Installation environment
Included items

System Requirements for USB Connection

PC
A model preinstalled with the 32-bit or 64-bit version of Windows XP, Vista, or 7, or a PC preinstalled with
Windows XP or later that has been upgraded to a later version of Windows.
USB cable
Use the included USB cable.
iM-01
Soft material such as resins (conductors such as the metals and the carbons are
off the subject).
X, Y, and Z: 86 × 55 × 26 mm (3.39 × 2.17 × 1.02 inches)
Maximum 55 mm (2.17 inches)
Width × depth: 86 × 55 mm (3.39 × 2.17 inches)
200 g (0.4 lb)
Stepping motor
X and Y axes: 6 to 240 mm/min (0.24 to 9.45 inches/min)
Z axis: 6 to 180 mm/min (0.24 to 7.09 inches/min)
0.01 mm/step (0.00039 inches/step; RML-1), 0.001 mm/step (0.000039 inches/
step; NC code)
0.000186 mm/step (0.00000732 inches/step; micro steps)
iM-01 spindle motor
USB (compliant with Universal Serial Bus Specification Revision 2.0 Full Speed)
RML-1, NC code
Dedicated AC adapter
Machine
Approximately 14 W
During operation: 57 dB (A) or less (when not cutting), during standby: 39 dB
(A) or less
Width × depth × height: 214 × 200 × 205 mm (8.43 × 7.87 × 8.07 inches)
1.7 kg (3.7 lb)
Operating environment: Temperature of 5 to 35°C (41 to 95 °F), 35 to 80% relative
humidity (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Power cord, AC adapter, USB cable, cutting tool (axis diameter: 2.35 mm, Tip of the
blade diameter: 1.6 mm), mounting screws (for fixing the cutting tool in place),
hexagonal wrench (for fixing the cutting tool in place), spare hooks, replacement
spindle motor, blower fan, maintenance grease, cleaning brush, double-sided
tape, trial cutting materials, trial scrap plate, flathead screwdriver, Roland Software
Package, setting boad, and user's manuals
Main Unit Specifications
AC 100 to 240 V ±10%, 50/60 Hz
DC 24 V, 0.7A
Chapter 4 Appendix
71