Sharp LC-37AD5E Service Manual page 50

LC-37AD5E
<When EXT1 is used for external input>
No EXT1-Composite output of the external input system.
Checklist:
1) Is "INPUT SOURCE" button
2) Is MENU-PICTURE-CONTRAST/BRIGHTNESS set to "MIN"? ••• Set it to an appropriate level.
3) Check the connection to the external device ••• Connect it correctly as per the operation manual for the device.
Is composite video signal sent to pin (20) of SCART1 (J1101)?
Is composite video signal (VIN_1) sent to input terminal pin (6) of
IC2702 (SW)?
Is composite video signal (VIN1) sent to input terminal pin (190)
of IC3002 (VCT)?
Refer to "No video output in all modes".
<When EXT1 is used for external input>
No EXT1-RGB output of the external input system.
Checklist:
1) Is "INPUT SOURCE" button
2) Is MENU-PICTURE-CONTRAST/BRIGHTNESS set to "MIN"? ••• Set it to an appropriate level.
3) Check the connection to the external device ••• Connect it correctly as per the operation manual for the device.
Is RGB signal sent to pins (15)/R, (11)/G and (7)/B of SCART1
(J1101)?
Is RGB signal (R1/G1/B1=VIN_6/5/9) sent to input terminal pins
(187), (175) and (182) of IC3002 (VCT)?
Refer to "No video output in all modes".
No picture on the display (3)
on the remote control set up correctly? ••• See the operation manual and set "INPUT SOURCE" to "EXIT1".
YES
YES
YES
No picture on the display (4)
on the remote control set up correctly? ••• See the operation manual and set "INPUT SOURCE" to "EXIT1".
YES
YES
NO Check external connection, input setting, SCART1 and periph-
eral circuits.
NO Check CONNECTOR (P1101/SC2702), SCART1 (J1101) and
peripheral circuits.
NO Check IC2702 (SW) and peripheral circuits.
NO Check external connection, input setting, SCART1 (J1101) and
peripheral circuits.
NO Check CONNECTOR (P1101/SC2702), SCART1 (J1101) and
peripheral circuits.
4 – 10