Using An Ipod/Iphone; Radio - Panasonic SC-PMX5 Operating Instructions Manual

Using an iPod/iPhone

Connector
1
Press to open the cover and insert a compatible
dock adapter.
iPod/iPhone
(not supplied)
Dock adapter
(not supplied)
2
Connect the iPod/iPhone firmly.
Make sure to remove the iPod/iPhone from its case.
Make sure to align your iPod/iPhone with the connector
when inserting.
Use a compatible dock adapter.
If a dock adapter is not available, insert and remove
the iPod/iPhone with care.
3
Press [iPod] and then press [4/9] to start
playback.
Pause playback
Press [4/9] or [8].
Skip track
Press [2] or [6]
(main unit: [2/3] or [5/6]).
Search the
Press and hold [3] or [5]
current track
(main unit: [2/3] or [5/6]).
View iPod menu Press [iPod MENU].
Select an item
Press [R, T] and then press [OK].
Note:
• Depending on the model, it may be necessary to remove
the iPod/iPhone and select the album, artist, etc. on the
iPod/iPhone.
• Operation results may vary depending on the iPod/iPhone
models.
• Read the User Guide of the iPod/iPhone for the
operating instructions.
Compatible iPod/iPhone
As of January 2012
Update your iPod/iPhone with the latest software before
using this system.
iPod touch
1st, 2nd, 3rd and 4th generation
iPod nano
2nd, 3rd, 4th, 5th and 6th generation
iPod classic
iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G /
iPhone
Charging an iPod/iPhone
An iPod/iPhone is charged automatically when connected
to the system (even when the system is in standby mode).
• See the iPod/iPhone display for its battery charging
status.
• Disconnect the iPod/iPhone if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.

Radio

30 FM and 15 AM stations can be preset.
Preparation
Press [RADIO] to select "FM" or "AM".
Automatic presetting
1
Press [RADIO MENU] to select "A.PRESET".
2
Press [Y, U] to select "LOWEST" or "CURRENT"
frequency.
3
Press [OK] to start presetting.
To cancel, press [8].
Manual tuning and presetting
1
Press [3] or [5] to tune in to the station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies the
same preset number.
Selecting a preset station
Press the numeric buttons, [2] or [6] (main unit:
[2/3] or [5/6]) to select the preset station.
7
7