AEG Lavamat 52810 User Information
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. Lavamat 52810
  6. User information

AEG Lavamat 52810 User Information

Washing machine
Hide thumbs Also See for Lavamat 52810:
Table of Contents

Advertisement

Quick Links

See also: User Information
LAVAMAT 52810
Washing machine
User information

Advertisement

Table of Contents
loading

Related Manuals for AEG Lavamat 52810

Summary of Contents for AEG Lavamat 52810

  • Page 1 LAVAMAT 52810 Washing machine User information...
  • Page 2 Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety.

  • Page 3: Table Of Contents

    Contents Operating Instructions ........Safety .
  • Page 4 Installation and connection instructions ....25 Safety information for the installation......25 Installing the appliance .

  • Page 5: Operating Instructions

    Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. • If the appliance is delivered in the winter months when there are mi- nus temperatures: Store the washing machine at room temperature for 24 hours before using for the first time.

  • Page 6: General Safety

    General safety • Repairs to the washing machine must only be carried out by qualified service engineers. • Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible.

  • Page 7: Description Of The Appliance

    Description of the appliance Detergent dispenser Control panel drawer Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control Panel SPIN/RINSE HOLD button Programme option buttons Programme Progress display DELAY TIMER button DOOR indicator Programme knob START/PAUSE button...

  • Page 8: Programme Overview

    Programme overview Additional Spin speed programmes Programme ENERGY SAVING • • • • COTTONS/LINEN • • • • • 95, 60, 40, 30 EASY-CARES • • • • 60, 40 EASY IRON 40 • • • • DELICATES • • •...
  • Page 9 Care Application/Features symbols Energy-saving programme at 60°C for lightly to normally soiled whites/col- oureds made of cotton/linen. J M O Programme for normally to heavily soiled coloureds/whites made of cotton/ linen. I K N Programme for easy-care mixed fibres and synthetics. Special programme at 40°C for easy-care fabrics which after being washed using this programme need to be ironed only lightly or not at all.

  • Page 10: Before The First Wash

    Before the first wash 1. Open the detergent dispenser drawer. 2. Pour about 1 litre of water through the detergent dispenser drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly. 3.

  • Page 11: Adding Detergent/Additives

    Adding detergent/additives Warning! Use only detergents and additives that are suitable for use in domestic washing machines. For USA and Canada only! Important! Only LOW-SUDSING detergent suitable for a front-loading washing machine can be used in this machine. This machine can heat the water up to 95 degrees celsius, or 200 degrees fahrenheit, and care should be taken to ensure that the correct washing powder is used.

  • Page 12: Switching On The Appliance/Selecting A Programme

    Washing powder/tablets for the main wash If you are using water softener and need the right-hand compartment for the pre-wash/stain treatment agent, add the water softener to the main wash detergent in the left compartment. Softeners, wash-care products to preserve the shape of garments, starch Do not fill the compartment beyond the MAX mark.

  • Page 13: Selecting The Programme Options

    RINSE HOLD If RINSE HOLD is selected, the washing is left to soak in the last rinse water. There is no final spin after the intermediate spin(s). Intermediate spins are programme-dependent and cannot be altered. Selecting the programme options If desired, press the programme op- tion button(s).

  • Page 14: Setting The Delay Timer

    To switch off RINSE +: 1. Turn the programme knob to COTTONS/LINEN, EASY-CARES/EASY IRON or DELICATES (at any temperature). 2. Hold down the buttons PRE-WASH and DELAY TIMER at the same time, until RINSE + goes out on the programme progress display. RINSE + is now permanently switched off.

  • Page 15: Interrupting A Programme/Adding Washing

    Interrupting a programme/adding washing Interrupting a programme • A washing programme can be interrupted at any time by pressing the START/PAUSE button. It is then re-started by pressing the START/ PAUSE button again. • To stop the washing machine before the programme has ended, turn the programme knob to OFF.

  • Page 16: Child Safety Device

    Child safety device When the child safety device is set, the door can no longer be closed. Setting the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. Warning! The knob must not be sunk-in after being set, otherwise the child safety device is not active.

  • Page 17: Cleaning And Maintenance

    Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Cleaning procedure If you plan to wash mainly at low temperature, you should run a hot programme from time to time.

  • Page 18: What To Do If

    Door and rubber collar Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door. Clean the glass in the door and the rubber collar regularly. What to do if... Remedying small malfunctions If the programme progress display indicates one of the following fault codes during operation:...
  • Page 19 Problem Possible cause Remedy Tap turned off. Turn tap on. Filter in the screw connec- Turn off the water tap. Un- END display flashes 1x. tion of the inlet hose is screw hose, take out filter (Problems with water blocked. and clean it.

  • Page 20: If The Wash Results Are Not Satisfactory

    Problem Possible cause Remedy Wait until DOOR light goes Door locked. off and END light comes on. Programme continues, when power cut is over. Door cannot be opened Power cut. (All display indi- when appliance is To remove washing: cators are off.) switched on.

  • Page 21: Carrying Out An Emergency Drain

    Carrying out an emergency drain Warning! Before emergency draining, switch off the washing machine and remove the mains plug from the socket. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain.

  • Page 22: Drain Pump

    Drain pump The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e. g. if the pump wheel is blocked. Please make sure before loading the washing that there are no foreign bodies in the pockets or caught between the washing.

  • Page 23: Disposal

    Disposal Packaging material The packaging materials are environmentally friendly and can be recy- cled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance The symbol on the product or on its packaging indicates that this...

  • Page 24: Technical Data

    Technical data This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x Width x Depth 850 x 598 x 603 mm Depth when door is open 980 mm...

  • Page 25: Installation And Connection Instructions

    Installation and connection instructions 1 Safety information for the installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sus- tained while it was being transported. Do not under any circumstanc- es connect an appliance that is damaged.

  • Page 26: Installing The Appliance

    Installing the appliance Transporting the appliance Warning! The washing machine is very heavy. Risk of injury. Be careful when lifting. • Do not lay the appliance on its front nor on its right side (as seen from the front). Electrical components may get wet. •...
  • Page 27 2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance. 3. With the provided spanner unscrew and remove the central rear bolt A. Slide out the relevant plastic spacer. 4. Unscrew and remove the two large rear bolts B and the six smaller bolts...
  • Page 28 5. Remove the bracket D. 6. Tighten up the six smaller bolts C. 7. Open the porthole and remove the polystyrene block on the door seal. 8. Fill the smaller upper hole and the two large ones with the correspond- ing plastic plug caps supplied in the bag containing the instruction booklet.

  • Page 29: Where To Install

    Connect the water inlet hose as described under the paragraph “Water inlet”. Where to install Important! The appliance must not be used in a room where there is a danger of frost. Frost damage or impaired operation! Frost damage is not covered by the warranty.

  • Page 30: Connecting To The Water Supply

    Connecting to the water supply Permitted water pressure The water pressure must be at least 1bar (=10N/cm =0.1MPa) and may be a maximum of 10bar (=100N/cm =1MPa). – If more than 10bar: Connect a pressure reduction valve. – If less than 1bar: Disconnect the appliance end of the inlet hose from the solenoid inlet valve and remove the flow meter.

  • Page 31: Aqua Control

    4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. Installation should comply with local water authority and building regula- tions’ requirements. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe op- eration of the appliance.

  • Page 32: Water Drainage

    Water drainage The maximum permitted difference between the height of the surface on which the appliance is installed and the water outlet is 1 metre. Only original hoses may be used to extend hoses. (A maximum of 3 m laid on the floor and then 80 cm vertically). The Customer Care Depart- ment stocks outlet hoses of different lengths.

  • Page 33: Guarantee/Customer Service

    Guarantee/Customer Service Centres EURO-LINE APPLIANCES LENGTH OF WARRANTY EURO-LINE WILL PAY FOR: TWO YEAR FULL WARRANTY Replacement parts and/or labour to repair defects in materials or workmanship. Service from original date of purchase, including parts must be provided by an authorized Euro-Line and labour, to the first purchaser of this company (unless advised otherwise).
  • Page 34 EURO-PARTS, USA EURO-PARTS, CANADA EURO-LINE APPLIANCES Tel: 1-800-561-4614 Tel: 1-800-678-8352 1-800-421-6332 Fax: 1-519-528-5001 Fax: 1-519-528 5001 Tel. Direct: 1-905-829-3980 Fax: 1-905-829-3985 User Instructions & Installation Manual Service & Repair To save you time and money please have the following information ready in case you have to call for service: •...

  • Page 35: Service

    Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instruc- tions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
  • Page 36 132 972 960-01-352007 Subject to change without notice...

Table of Contents