Using Your Cafe Creamy; Preparing Hot Milk With Foam - Sunbeam Cafe Creamy EM0180 Instruction And Recipe Booklet

Using your Cafe Creamy

Automatic Milk Frother
Before using your Cafe Creamy™ Automatic
Milk Frother for the first time, wash the milk
jug and plastic lid in warm, soapy water.
Rinse and dry thoroughly. Repeat with the
foam and milk mixing attachments located
underneath the power base.
Note: Do not immerse the power base in
water or any other liquid, or allow moisture
to come into contact with these parts.
See Figure 1.
Figure 1
Figure 2
Note: Do not place any part of the appliance
in the dishwasher.
Note: To stop the appliance at any time,
press the button on the control panel
originally activated again.
4
™
Preparing Hot Milk Beverage with Foam
1. Remove the milk jug from the power base.
2. Open the lid of the milk jug and insert the
foam blender attachment into the base of
the milk jug.
3. Pour milk into the milk jug, to a maximum
of 250mL, the level that is marked with
'M' for max. See Figure 3.
Tip: To create a frothy hot chocolate, simply
add 1-2 tablespoons of chocolate powder.
Note: If you fill the milk jug above the
maximum level, hot milk may be ejected
during operation.
Note: The milk jug must also be filled above
the minimum level, as indicated by 'O'
symbol, to operate properly.
4. Secure the lid onto the milk jug
5. Plug the power cord into a 230-240V AC
power outlet and switch the power on and
place the milk jug on the heating element
on the power base.
Note: The appliance does not have an on/
off button. Functions are activated through
pressing feature buttons located on the
control panel.
Figure 3