Description Of The Washing Machine And Starting A Wash Cycle; Control Panel; Indicator Lights - Hotpoint Ariston ECOTF 1051 Instructions For Use Manual

Description of the washing
machine and starting a wash cycle

Control panel

GB
button with indicator light
ON/OFF button with indicator light: switches the machine
on and off. If the indicator light is illuminated, this indicates
that the machine is switched on.
WASH CYCLE knob: programmes the wash cycles. During
the wash cycle, the knob does not move.
SPIN SPEED button: sets the spin speed or exclude the
spin cycle completely (see "Personalisation").
TEMPERATURE button: sets the temperature or the cold
wash cycle (see "Personalisation").
DISPLAY: indicates the time remaining for the selected wash
cycle and, if a delayed start has been programmed, the time
remaining until the start of the wash cycle.
CONTROL PANEL LOCK button with indicator light:
activates or deactivates the control panel lock.
FUNCTION buttons with indicator light: used to select the
available functions. The indicator light corresponding to the
selected function will remain lit.
WASH CYCLE PROGRESS indicator lights: used to moni-
tor the progress of the wash cycle. The illuminated indicator
light shows which phase is in progress.
DOOR LOCKED indicator light: indicates whether the door
may be opened or not (see next page).
START/PAUSE button with indicator light: starts or tempo-
rarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this button; the
corresponding indicator light will flash orange, while the indicator
light for the current wash cycle phase will remain lit in a fixed
manner. If the DOOR LOCKED
the door may be opened.To start the wash cycle from the point
at which it was interrupted, press this button again.
6
TEMPERATURE
ON/OFF
button
SPIN
WASH CYCLE
SPEED
knob
button
indicator light is switched off,
WASH CYCLE
PROGRESS
DISPLAY
FUNCTION

indicator lights

CONTROL PANEL LOCK
button with indicator light
Standby mode
This washing machine, in compliance with new energy saving
regulations, is fitted with an automatic standby system which is
enabled after about 30 minutes if no activity is detected. Press the
ON-OFF button briefly and wait for the machine to start up again.
Consumption in off-mode: 0,5 W
Consumption in Left-on: 0,5 W
Indicator lights
The indicator lights provide important information.
This is what they can tell you:
Wash cycle phase indicator lights
As the WASH CYCLE knob is rotated, the indicator lights
illuminate, indicating the stages which will be performed by
the machine in accordance with the selected wash cycle.
Once the desired wash cycle has been selected and has begun,
the indicator lights switch on one by one to indicate which phase
of the cycle is currently in progress.
Wash
Rinse
Spin
Drain
End of wash cycle
Function buttons and corresponding indicator lights
When a function is selected, the corresponding indicator
light will illuminate. If the selected function is not compa-
tible with the programmed wash cycle, the corresponding
indicator light will flash, a sound signal will be emitted and
the function will not be activated. If a function which is in-
compatible with another function selected previously, only
the most recent selection will remain active.
LID LOCKED
indicator light
START/PAUSE
button with indicator light
buttons with