JVC GY-HM660U Instruction page 126

9 Meta-FTP1 to Meta-FTP4
(The name specified in the respective
[Alias] items is displayed)
o Alias
For setting a name to distinguish the settings of this
camera recorder.
The name set in this item will be displayed in the
[Import Metadata] options.
* Enter not more than 31 characters.
o Protocol
For setting the protocol of the FTP server to be
connected.
FTP:
0
Protocol that does not encrypt the incoming and
outgoing data.
SFTP:
0
Protocol that encrypts incoming and outgoing
data using SSH.
FTPS:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
FTPES:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
[Setting Values: RFTP, SFTP, FTPS, FTPES]
o Server
For setting the server name ("mystation.com", etc.)
or the IP address ("192.168.0.1", etc.) of the FTP
server.
* Enter not more than 127 characters using single-
byte alphanumeric characters (a to z, 0 to 9),
single-byte hyphen [-], or dot [.].
o Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
o File Path
Enter the path name for the metadata file ("/pub/
meta.xml", "/home/user/meta2.xml", etc.)
* Enter not more than 127 characters.
o Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
126
o PASV Mode
For setting whether to set the communication mode
used for file transfer to the passive mode.
Set to "On" if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
When [Protocol] is set to "SFTP", this item
0
appears as "---" and cannot be selected.
Clip Server
For setting the server and directory for uploading
recorded clips in the SD card to the FTP server.
9 Clip-FTP1 to Clip-FTP4
(The name specified in the respective
[Alias] items is displayed)
o Alias
For setting a name to distinguish the settings of this
camera recorder.
The name set in this item will appear on the [FTP
Upload] action screen of the thumbnail display.
* Enter not more than 31 characters.
o Protocol
For setting the protocol of the FTP server to be
connected.
FTP:
0
Protocol that does not encrypt the incoming and
outgoing data.
SFTP:
0
Protocol that encrypts incoming and outgoing
data using SSH.
FTPS:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
FTPES:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
ZIXI:
0
Enables stable transmission by reducing jitter
and packet loss significantly through
communicating via a relay server.
[Setting Values: RFTP, SFTP, FTPS, FTPES, ZIXI]
Memo :
To use the "ZIXI" setting, a dedicated server is
0
needed separately.
If "ZIXI" is set, the resume function is enabled.
0