Lcd/Vf Menu; Shooting Assist Item - JVC GY-HM660U Instruction

LCD/VF Menu

Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P108 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P109 [Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P110 [Display Settings Item] )
LCD + VF
For selecting a method to switch between the LCD
monitor and viewfinder screen displays.
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
On:
0
Displays images on the viewfinder at all times.
Off:
0
Turns off the viewfinder screen display when the
LCD monitor is turned on.
[Setting Values: On, ROff]
Memo :
When [Network] is set to "On", this item is fixed
0
at "Off" and cannot be selected.
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select "On" to display in color, and "Off" to display
in black-and-white.
[Setting Values: ROn, Off]
Memo :
The setting of this item is valid only in Camera
0
mode.
When this item is set to "Off", only the captured
0
images are displayed in black-and-white. The
display and menu screens are displayed in
color.
108
VF Bright
For setting the brightness of the viewfinder screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 (R 0)]
VF Contrast
For setting the difference in luminance between the
darkest and brightness areas in the viewfinder
screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Contrast
For setting the difference in luminance between the
darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Backlight
For setting the brightness of the LCD monitor
backlight.
Increasing the value increases the brightness.
[Setting Values: -1, R 0, +1]
LCD Mirror
For specifying the image display method when
facing the LCD monitor.
Select "Mirror" to display the image after laterally
inverting it. (Mirror display)
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
[Setting Values: Mirror, RNormal]
Memo :
The setting of this item is valid only in Camera
0
mode.
During color bar, menu screen and status
0
screen display, the "Mirror" setting is disabled.
(A P140 [Color Bar Output] )

Shooting Assist Item

Focus Assist
For setting whether to add color to the contour of
the focused image upon switching the image to
black-and-white.
[Setting Values: On, ROff]