Setting The Polarity Of The Rear View Camera; Setting The Reversed Image Display For The Rear View Image; Setting The Camera For Camera View Mode - Pioneer AVH-X8700BT Operation Manual

System settings
Setting the polarity of the rear
view camera
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [Camera settings].
4 Touch [Camera Polarity] repeatedly
until the desired setting appears.
! Battery (default):
When the polarity of the connected lead is
positive while the gearstick is in the RE-
VERSE (R) position.
! Ground:
When the polarity of the connected lead is
negative while the gearstick is in the RE-
VERSE (R) position.
When the gearstick is aligned to the REVERSE
(R) position after setting the rear view camera,
the rear view image appears.
Setting the reversed image
display for the rear view image
Rear view camera images are displayed re-
versed (as mirror images) on the front screen
except when a rear view camera that can out-
put images in the correct direction is used.
You can set whether to reverse the rear view
camera images to be displayed on the front
screen.
p This setting is available only when you stop
your vehicle in a safe place and apply the
handbrake.
p This function is available only when "Back
Camera Input" is "On".
= For details, refer to Setting rear view
camera activation on page 100.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [Camera settings].
4 Touch [Back Camera: Reverse Video] re-
peatedly until the desired setting appears.
! Off (default):
Does not reverse the rear view camera
images.
! On:
Reverses the rear view camera images.
Setting the camera for
Camera View mode
To display Camera View at all times, "Camera
View" needs to be set to "On".
p To set the rear view camera for Camera
View mode, "Back Camera Input" needs
to be set to "On".
= For details, refer to Setting rear view
camera activation on page 100.
p To set the second camera for Camera
View mode, set "AV Input" to "Camera" or
set "2nd Camera Input" to "On".
= For details, refer to Setting AV input on
page 99.
= For details, refer to Setting the second
camera input on page 103.
p You can also turn this function on by touch-
ing [Camera View] on the AV source selec-
tion screen or in the source list.
1 Press the HOME button to display the
Top menu screen.
Chapter
20
101
Engb