Connecting An Mhl-Compatible Device; Connecting An Hdmi-Equipped Component To The Front Panel Input; Using A Usb Cable To Connect To A Computer - Pioneer SC-LX88 Operating Instructions Manual
Hide thumbs
Also See for SC-LX88:
- Operating instructions manual (58 pages) ,
- Quick start manual (25 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
03
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
IN
1
( DVD )
IN
1
BD IN
IN
2
IN
3
IN
4
IN
6
IN
/MHL
7
(DVD)
(SAT/CBL)
(DVR/BDR)
(OUTPUT 5 V
0.9 A MAX)
%
Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the rear panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see
page 107
.
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit's power is turned on.)
! For instructions on playing the MHL-compatible device, see
! Do not place the MHL device on this unit which has the power turned on.
Connecting an HDMI-equipped component to the front panel
input
iPod iPhone
DIRECT CONTROL
Video camera (etc.)
BD IN
IN
IN
IN
IN
IN
/MHL
2
3
4
6
7
( SAT/CBL )
( DVR/BDR )
( OUTPUT 5 V
0.9 A MAX )
MHL cable
MHL enabled
device
MHL Setup
Playing an MHL-compatible device
on
AUTO/ALC/
DIRECT
STATUS
BAND
TUNER EDIT
HDMI 5 INPUT
5V
1 A
Using a USB cable to connect to a computer
SC-LX88 only
By using a USB cable (sold separately) to connect this unit's USB-DAC IN terminal to the USB port on a com-
puter, this unit can be used as a D/A converter.
For details regarding the output of signals input to the USB-DAC IN terminal, see
on
page 59
.
Important
! The exclusive driver must be installed on the computer in order to play high sound quality files of over
48 kHz/24 bits.
The driver software is provided on the included CD-ROM.
! When installing the driver, this receiver and the computer must be connected as shown below. After connect-
ing, turn this receiver's power on and select the USB-DAC input for the main zone. Note that for Mac OS, there
is no need to install the driver software.
on
page 59
.
Note
! This unit cannot be used to play audio files from a computer unless Media Player is installed on the connected
computer.
45
Connecting your equipment
Playing music from a computer
Computer
USB-DAC
USB
USB-DAC
IN
IN
A-Type
B-Type
Advertisement
Table of Contents
