Hamilton Beach 37520 Instruction Manual page 6

For Low Water:
1
Unit will beep, display will tell you the water is low, and the LOW
WATER light will come on. To Add Water: Pull out water drawer and
gradually fill with water. Check the viewing window to see water level.
How to Set Delay Start Timer
1
Press ON/OFF ( ) button and then up or down arrows to set cooking time. Press DELAY button. The display
will flash 00:30 as the default delay time. Minimum set time is 30 minutes and maximum delay time is 24 hours.
6
840243300 ENv13.indd 6
2
2
NOTE: Raw meat should NEVER be cooked using
Delay Start Timer. Visit www.foodsafety.gov for
more information on safe food handling.
• Cooking/steaming will begin once the unit has
completed the delay time countdown.
• The steamer will switch to WARM mode for up to
1 hour after cooking ends.
• If the water level in the steamer becomes too low,
it will switch OFF and flash "– –." Fill the unit with
water to the MAX line; then push the ON/OFF ( )
button to restart the steamer. The LOW WATER
indicator light will also illuminate.
3
Press up or down arrows to set
delay time. After approximately
5 seconds, the display will show
the selected delay time and the
unit will begin to count down.
After the delay time expires,
steamer will switch to cooking
mode and steam for selected
cook time.
6/25/14 2:52 PM