Chauvet WASH FX Quick Reference Manual page 5

Wash FX™ QRG
Control Panel
Description
Menu Map
Main Function
Addr
Ver
dISP
LEd
VAL
CoLo
Auto
SLnd
CHnd
DMX Linking
Starting Address
Master/Slave
Connection
Button
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Programming Levels
1–512
XX.XX
ON
OFF
on
oFF
RED
GREEN
BLUE
So 1
So 2
So 3
C1–C9
rUn
SL - 1
SL - 2
7CH
23CH
The Wash FX™ works with a DMX controller. Information about configuring
the Wash FX™ for DMX operation is in the User Manual, which is available
from the CHAUVET®
manuals-literature/. Information about DMX is in the CHAUVET® DMX Primer,
which is available
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
The Wash FX™ has 7- and 23-channel DMX personalities. To ensure full access
to all channels in each DMX mode, the highest recommended DMX address for
this product is 490.
The Wash FX™ works in Master/Slave mode. Information about configuring this
product for Master/Slave mode is in the User Manual, which is available from the
CHAUVET® website at: http://www.chauvetlighting.com/product-manuals-literature/.
Sets the DMX starting address
Displays the software version
Inverts the display
Turn the LEDs on and off
1–255
Sets red value
1–255 Sets green value
1–255 Sets blue value
Selects strobe speed 1
Selects strobe speed 2
Selects strobe speed 3
Sets to a built-in color
Starts the auto program
Sets to Slave 1
Sets to Slave 2
Sets the DMX personality
website: http://www.chauvetlighting.com/product-
from
5
Function
Description
the CHAUVET®
EN
website: