Table of Contents
Advertisement
ALIGNMENT INSTRUCTIONS
4) GEOMETRIC ADJUSTMENTS (S6)
• Enter the service mode and select service adjustment S6.
• You can see the OSD as shown in below.
GEOMETRY
H. SHIFT
V. SHIFT
V. SIZE
VBLK SHIFT
VBLK SHIFT ON
NO SD POWER OFF
MOVE
ADJUST
4-1. Horizontal SHIFT Adjustment
• Select H.SHIFT item, adjust H.SHIFT data value to obtain proper horizontal centering of the
internal cross pattern at the left and right of the screen.
4-2. Vertical SHIFT Adjustment
• Select V.SHIFT item, adjust V.SHIFT data value to center the raster properly on thescreen.
4-3. Vertical Size Adjustment
• Select "V.SIZE" item, adjust "V.SIZE" data value to proper vertical size as follows.
09
02
38
03
NO
NO
RECALL:SET
10
Advertisement
Table of Contents
