Brother P-Touch PT-E800W Quick Setup Manual

ELECTRONIC LABELING SYSTEM
PT-E800W
Quick Setup Guide
Thank you for purchasing the P-touch labeling system model PT-E800W.
Your new PT-E800W is an intuitive, easy to operate and feature-rich P-touch
labeling system that produces professionally looking, high-quality labels.
This manual contains basic procedures for using your P-touch labeling system.
Read the whole guide before using your product and keep it for later reference.
The available options and supplies may vary depending on the country.
To download and install printer drivers and software, visit our website.
www.brother.com/inst
For more information on installing the driver and software, see Create a
Label using a Computer.
Available Manuals
 Product Safety Guide
This guide provides safety information; read it before you use your P-touch
labeling system.
 Quick Setup Guide (this guide)
This guide provides basic information about using your P-touch labeling
system along with detailed troubleshooting tips.
 User's Guide
When you download the installer from www.brother.com/inst and install it, the
"Brother Manual" folder is created on your computer's desktop and this
manual is stored in this folder.
This guide provides additional information about your P-touch labeling system's
settings and operations, troubleshooting tips, and maintenance instructions.
In addition, you can download individual manuals that you need from the
Brother support website.
Visit the Brother support website at support.brother.com and click Manuals
on your model page to download the other manuals.
Unpacking Your P-touch Labeling system
Before using your P-touch labeling system, check that the package contains
the following:
P-touch Labeling Keyboard LCD unit
system
Product Safety Guide Quick Setup Guide
Power supply cord
Coin cell battery Li-ion batteries
(PA-BT-4000LI)
The components included in the box may differ depending on your country.
D01JGH001A
English
Keyboard LCD unit
cable
AC adapter
USB cable Tape cassette
General Description
Front
1
2
Back
1 Handle
2 Cover open button
3 Top cover
4 Tape exit slot
5 (Label) indicator
6 (Battery) indicator
7 (Power) button
8 (Feed and Cut) button
Inside
1
2
1 Accessory storage
compartment
Use this space to store TZe tape
cassettes and the AC adapter.
Attaching the Keyboard LCD Unit
1.
Slide the cover on the bottom of the keyboard LCD unit to remove it, and
then connect the keyboard LCD unit cable.
Install the cover.
3
5
4
6
7
8
9
10
14
13
12
11
9 (Wi-Fi) button
10 Keyboard LCD unit
11 Keyboard LCD unit interface
outlet
12 Cable holder (holder for the
keyboard LCD unit cable)
13 USB port
14 AC adapter outlet
3
4
5
6
2 Coin cell battery holder
3 Tape cassette compartment
4 Print head
5 Tape cutter unit
6 Tape exit slot