Password - Casio Exilim EX-FR10 User Manual

Connecting by Wireless LAN for the First Time and Changing
the SSID and Password
When establishing a wireless connection between the camera and smartphone for
the first time, make sure to change the SSID and password as shown below. At the
time of purchase, the default SSID and password settings are the same for all
models. Using this model without changing the SSID and password may result in
mistaken connections with other devices in the same location as well as allow others
access to private information such as images.
• This step is required only once when you use this unit for the first time.
1.
On the camera, enter the REC mode.
2.
On the controller, display the home screen and
then tap "
This will enable connection with a smartphone.
• While the camera is connected with a smartphone, its
shutter button and [
• The camera operation below can also be used to put
it in a state that enables connection from a smartphone.
Turn off the camera.
1
On the camera, hold down [0] (Movie) as you hold down [p] (Power) until
2
the camera's operation lamp flashes green.
3.
For the smartphone Wi-Fi setting, input the camera SSID and

password.

This will connect the smartphone to the camera.
• The initial default SSID and password settings are shown below.
SSID: FR10 Camera
Password: 00000000
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
4.
On your smartphone, start up the EXILIM Link app.
5.
On the smartphone, tap "Connection Starting".
The camera operation lamp will light green to let you know the app is available for
use.
• If this is the first time you started up the app, its terms of use will appear on
your smartphone. Read the terms and then tap "Agree".
".
] (Movie) button are disabled.
0
Connecting the Camera with a Smartphone
64
(Wireless LAN)