Clearing A Gate Jam - Kodak Ektalite 1000 Instruction Manual

Clearing a
Gate Jam
KODAK EKTALITE Slide Projectors
Removing a Defective Slide or Foreign Object
To remove a defective slide stuck in the projector gate, you need to
remove the tray. DO NOT remove the cover or lock ring.
• Slide the tray release latch in the direction of the arrow
• With your other hand, lift off the tray.
• Hold it upside down, base side up.
• Rotate the base plate until it locks into position.
Operation
Tray release latch
A098_0061AC
A098_0048AC
67