Default Network Settings - Canon mg6850 series Online Manual

Default Network Settings

LAN Connection Defaults
Item
Change LAN
SSID
Communication mode
Wireless LAN security
IP address (IPv4)
IP address (IPv6)
Set printer name*
Enable/disable IPv6
Enable/disable WSD
Timeout setting
Enable/disable Bonjour
Service name
LPR protocol setting
PictBridge communication Enable
("XX" represents alphanumeric characters.)
* Default value depends on machine. To check value, use operation panel.
LAN settings
Direct Connection Defaults
Item
SSID (Identifier for direct connection) DIRECT-xxXX-MG6800series *1
Password
Wireless LAN security
Direct connection device name
Connection request confirmation
*1 "xx" represents alphanumeric characters. "XX" represents last two digits of machine's MAC address.
*2 The password is specified automatically.
*3 "ZZZZZZ" represents last six digits of machine's MAC address.
Default
Disable LAN
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
Enable
Enable
1 minute
Enable
Canon MG6800 series
Enable
Default
YYYYYYYYYY *2
WPA2-PSK (AES)
ZZZZZZ-MG6800series *3
Displayed
285