Operation; Operating Principals - Miele KM 6220 Operating Instructions Manual

Operating principals

The hob is equipped with electronic sensor controls which
react to finger contact.
When the hob is switched off only the symbols for the sensors
for switching the hob on and off and the safety lock are
visible.
When the hob is switched on all the other sensors light up as
well. On each of the numerical keypads, "0" lights up at
brightness level 2, and numbers 1-9 at brightness level 1.
If a power level is selected, the numbers from "0" to the level
set will light up in brightness level 2.
To operate the hob, touch the relevant sensor. Each time you
touch a sensor, an audible tone sounds.
Take care to keep the control panel clean and do not
place anything on top of it. The sensors may fail to react or
they could mistake the article or any dirt for a fingertip
contact, thereby activating a function or even causing the
hob to switch off automatically (see "Safety switch-off".)
Never place hot pans on the sensors. The electronic unit
underneath could get damaged.

Operation

29