HP EliteBook Folio 1040 G3 Maintenance And Service Manual page 48

5. Remove the touch cable from the right fan, and then disconnect the cable from the system board (4).
6. Remove the four Phillips PM2.0×4.0 screws (1) that secure the display assembly to the computer.
7. Open the display up to a 45 degree angle and position it with the base enclosure on a table and the
display hanging down (2).
8. Remove the computer from the display assembly (3).
Reverse this procedure to reassemble and install the display assembly.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts