2. RGB Adjustment
This function allows you to adjust an overall colour balance of the copied image by changing the strength
of red (R), green (G) and blue (B) at the time of scanning.
•
This function is available only in the full colour mode.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the [IMAGE] button to enter the image menu, and then press the
[RGB ADJUSTMENT] button.
Press the
or
4
balance. Then press the [ENTER] button.
• "0" is the standard setting.
• Pressing the
button strengthens the adjusted colour, and pressing the
• Select other copy modes as required.
5
Press the [START] button.
Canceling RGB adjustment
Move the indicator of the colour whose adjustment you want to cancel its adjustment to 0 by your
pressing the
or
If you want to cancel the adjustment of all colours, press the [DEFAULT] button, and then press the
[ENTER] button.
button of the colour to obtain the desired colour
button, and then press the [ENTER] button.
button weakens it.
4
121