To Adjust The Needle Thread Tension - Janome Memory Craft 9000 Service Manual

1. Turn on the power switch, select the pattern #9 (
hand wheel 2 to 3 rotations.
2. Open the face plate and adjust the thread tension with a screwdriver in the direction of:
A to looser the tension.
B to tighter the tension.
3. Close the face plate.
NOTE: Check that the auto-tension is set 'AUTO" when "ADJ" key is pressed on the touch
panel.

TO ADJUST THE NEEDLE THREAD TENSION

) and press the S/S key to turn the
1 1