Making An Outgoing Call; Answering An Incoming Call; Rejecting An Incoming Call; Volume Control - Jensen VX7010 Operating Instructions Manual

Making an Outgoing Call

Outgoing calls can be performed in two manners. The outgoing call can be direct
dialed using the front panel keypad or the by touching either the Phonebook or
Call History icons, selecting a name and touching the phone number.
Direct Dialing:
1. Press the front panel MENU button and then touch the BLUETOOTH icon to
access the Bluetooth® main menu. The following screen will appear:
2. Use the 0-9, */+, and # icons to input the phone number. If necessary touch the
green arrow icon to clear the last digit or the entire number and start over.
3. After entering the phone number, touch the
number dialed will be displayed on the screen.
4. To end the call, touch the

Answering an Incoming Call

To answer an incoming call touch the
clearly into the units microphone. To end the conversation, touch the

Rejecting an Incoming Call

Touch the Transfer to Phone icon to reject an incoming call. The call will revert to
your mobile phone and be left for voice mail.

Volume Control

To increase or decrease the volume level of an incoming call, turn the rotary knob
on the front panel or press the VOL+/ VOL- icons on the remote control.
64
Bluetooth Direct Dial Screen
icon.
icon. For best reception, speak loudly and
VX7010
icon to dial the call. The
icon.