Jensen VX7010 Operating Instructions Manual page 41

VX7010
Track Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The user
can manually select a track by touching the corresponding number. After entering
the track numbers touch the OK icon. If a wrong digit is entered touching the
arrow will remove the number. After touching OK playback will begin.
Controlling Playback
Inserting a Disc - Upon inserting a CD, disc play begins. You cannot insert a disc if
there is already a disc in the unit or if the power is off.
Ejecting a Disc - Press the Eject (
disc. The unit automatically reverts to Tuner mode. You may eject a disc with the
unit powered off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal
core mechanism operation occurs, press and hold the Eject (
front of the unit to reset the loading mechanism. Normal operation resumes.
Pausing Playback - Touch the Play/Pause (
play.
Moving Through Tracks - Touch the Next (
on the disc. Touch the Previous (
Repeat Playback - Touch the
following:
CD-DA: Repeat Track > Repeat Album > Repeat Off
CD-R/RW: Repeat Track > Repeat Album > Repeat Off
Random Play Select - Touch the Random (
in a random, shuffled order. Touch the Random (
Play mode.
Note: CD-R and CD-RW will not play unless the recording session is finalized.
CD Track Direct Entry Screen
) button on the front of the unit to eject the
) icon to move to the previous track.
icon to alter repeat mode according to the
) button on the
) icon to suspend or resume disc
) icon to advance to the next track
) icon to play the tracks on the disc
) icon again to cancel Random
41