Operating The Boiler - Baxi Combi 80e User Operating Instructions Manual

Supplied by HeatingSpares247.com
6 7 8 9
30° 40° 50° 60° 70° 80°
Power On
Neon
Fig. 5
Domestic
Hot Water
Heating Neon
Neon
30° 40° 50° 60° 70° 80°
On/Off/Reset
Selector Switch
OFF Position
Fig. 6
10 11
Burner On
Neon
Central
Fig. 4
Position (i)
(Central Heating or Hot Water)
Fig. 7
Position (ii)
Fig. 8
(Hot Water)

3.0 Operating the Boiler

3.1
1. Ensure that the electricity and gas supplies are
turned on. Check that the central heating pressure
is between 0.5 and 1.0 bar (Fig. 4).
2. Turn the On/Off/Reset selector switch either
anti-clockwise from the off position (Fig. 6) to both
central heating and domestic hot water or
clockwise to domestic hot water only.
3. In either position the green power on indicator
(
4. Position (i) In this position the central heating
will operate according to demand or provide
domestic hot water when a tap or shower is turned
on (Fig. 7). Priority is given to domestic hot water.
The central heating/hot water neon (
2
illuminate (Fig. 5). Neons 6 to 11 will illuminate as
the temperature rises.
bar
5. Position (ii) In this position hot water will be
provided when a tap or shower is turned on
Central Heating
(Fig. 8). The hot water neon (
System Pressure
(Fig. 5).
Gauge
6. The boiler will light automatically on demand.
2
7. The orange burner on neon (
bar
when the boiler is operating and the main burner is
on (Fig. 5).
IMPORTANT: When the selector switch is in
the '0' (Off) position the electrical supply to the
boiler is isolated. The boiler will not operate and
the integral timer (if fitted) will require resetting
once the selector switch is set to either Position
(i) or Position (ii).
Operating the Boiler
) will illuminate (Fig. 5).
) will
) will illuminate
) will illuminate
5