Panasonic KX-TGB210NZ Operating Instructions Manual page 28

TGB21xNZ(en).book Page 28 Monday, March 24, 2014 2:21 PM
Useful Information
Problem
I cannot make a call.
*1 KX-TGB212/KX-TGB213
Caller ID
Problem
Caller information is not displayed.
Caller information is slow to display.
Time on the unit has shifted.
28
Cause/solution
L The handset is too far from the base unit. Move
closer and try again.
*1
L Another unit is in use. Wait and try again later.
L If you are using a BT double adaptor to connect the
unit, remove the adaptor and connect the unit to the
phone wall socket directly. If the unit operates
properly, check or replace the adaptor.
L The unit is not designed to be used with rotary/pulse
dialling services.
Cause/solution
L You must subscribe to a Caller ID service. Contact
your service provider/telephone company for details.
L If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the
wall socket.
L If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL
service provider to have a DSL/ADSL Splitter
installed. We do not recommend the use of generic
DSL/ADSL filters. Contact your DSL/ADSL service
provider for details.
L Other telephone equipment such as a monitored
Burglar Alarm or the modem in the SKY Digital
decoder may be interfering with this unit. Disconnect
the other equipment and try again.
L Depending on your service provider/telephone
company, the unit may display the caller's
information at the 2nd ring or later.
L Move closer to the base unit.
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
"Manual" (off) (page 17).