Acer RA19WAANU Service Manual page 18

Hold one side of down side that had been
S14
separated from front bezel
Use properly force to pull up front bezel
Unhook the key function board from front bezel,
S15
disconnect the key function cable
Use a Hex-head screwdriver unscrewed 4 screws
S16
to release the DVI and D-SUB connectors
(No1~4Hex Nut screws
Size=M3x8;Torque=4.5~6.5KGFxCM).
4
4. Assembly and Disassembly Procedures (continued)
1
2
3
Unplug 2 lamp cables
S17
Disconnect the FFC cable to the connector of
S18
panel.
Use finger to push the lock according to arrow
direction then take out the FFC cable
Take out lamp cables right through the No.1-2
S19
square holes and separate the bracket chassis
module and LCD panel apart.
1
17
ACER X193HQ
Go to cover page
2