Recording Using The Cubase Ai 4 - Yamaha Audiogram 3 Service Manual

AUDIOGRAM3

RECORDING USING THE CUBASE AI 4

* Insert the attached DVD-ROM (X8515B00) and install the Cubase AI 4.
("Cubase AI 4" is a trademark of Steinberg Media Technologies GmbH.)
［Connection］
-50.0 dBu
MIC (XLR)
1
Launch Cubase AI 4.
Click [Start] → [All Program] → [Steinberg Cubase AI 4] → [Cubase AI 4] to launch the program. If the ASIO Multimedia
dialog window appears, click [Yes].
2
Select [Device Setup] from the [Device] menu to open the Device Setup window.
Select [VST Audio System] in the [Device] fi eld on the left side of the window. Select [ASIO DirectX Full Duplex Driver] in the
[ASIO Driver] fi eld on the right side of the window. A dialog box will appear asking "Do you want to switch the ASIO driver?".
Click [Switch].
3
Select [ASIO DirectX Full Duplex Driver] in the [Devices] fi eld on the left side of the Device
Setup window and click the [Control Panel] button to the right side.
18
+14.0 ± 3 dBu
STEREO OUT (L/R)
OFF MIC
Maximum Maximum
USB cable
Cubase AI
Computer