Buell XB 2008 Series Service Manual page 417

sm00317
2
3
4
1. Arbor press
2. Transmission remover (Part No. B-43985-1)
3. Crankcase
4. Transmission assembly
5. Parallel supports
Figure 6-59. Removing Transmission Assembly from Left
Case Half
1
5
Wear safety glasses or goggles when removing or
installing retaining rings. Retaining rings can slip from the
pliers and could be propelled with enough force to cause
serious eye injury. (00312a)
3. See Figure 6-59. Remove left crankcase half and transmis-
sion assembly (4) from engine stand.
a. Place crankcase half (3) and transmission assembly
(4) on arbor press (1) and support transmission
assembly on parallel supports (5).
b. Press transmission assembly using TRANSMISSION
REMOVER (Part No. B-43895-1) (2) to remove
transmission assembly from crankcase half.
c. Remove crankcase from press.
2008 XB Service: Drive/Transmission 6-31