Buell XB 2008 Series Service Manual page 257

sm00739
Figure 3-18. Center Tie Bar Mount
40. Once engine has been removed from vehicle, finish
removing the following items as required:
a. Shifter assembly. See
b. See Figure 3-18. Center tie bar mount.
c. See Figure 3-19. Swingarm pivot shaft pinch bolt
threaded insert.
d. See Figure 3-20. Aluminum bushings from front
exhaust mount.
e. See Figure 3-21. Wire guard located under the
sprocket cover.
sm00740
Figure 3-19. Threaded Insert
6.2 PRIMARY COVER.
sm03745
2
1. Left side
2. Right side
Figure 3-20. Front Exhaust Mount Bushings (2 piece)
sm02996
Figure 3-21. Wire Guard
sm02979
Figure 3-22. Rear Isolator Assembly
2008 XB Service: Engine 3-21
1