Selecting The Hdmi Picture Size Automatically; Other Picture And Audio Settings; Hdmi Auto View; Adjusting Image Position - Sharp Aquos LC-65XS1M Operation Manual

Useful Viewing functions
Selecting the HDMI picture size
automatically
Setup

HDMI Auto View

This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using INPUT1, 2, 3 (HDMI) terminals.

Other picture and audio settings

Adjusting image position

Setup
Position
For adjusting a picture's horizontal and vertical
position.
Item
H-Pos.: Centres the image by moving it to the left or
right.
V-Pos.: Centres the image by moving it up or down.
NOTE
• Adjustments are stored separately for each input source.
• Depending on the input signal type or "WIDE MODE"
setting, a position setting may not be available.

Automatic volume adjustment

Option

Auto Volume

Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Outputting audio only
Option
Audio Only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Item
Off: Both screen images and audio are output.
On: Audio is output without a screen image.
30

Time display

Option
Time Display
Time Display
This function allows you to display the clock time in the
lower-right corner of the screen.
Item
On: Displays the clock time.
On (half-hourly): Displays the clock time in 30-minute
increments.
Off: Hides the clock time.
Time Format
You can select the time format (either "24HR" or "AM/
PM") for the clock time.
Option

Game Play Time

This function allows you to display the elapsed time on
the screen when "AV MODE" is set to "GAME".
Item
On: Under connecting a game console to the AVC
System, the elapsed time is displayed in 30-minute
increments after you start playing a game.
Off: Hides the time.
NOTE
• This menu is not selectable if the input source is "TV".