Table of Contents
Advertisement
Using your machine
CAUTION: Always ensure machine is off before attaching/detaching the, floorhead, accessories and tank.
The steamer and accessories get very hot during use, always allow them to cool down before handling. Taps should
be turned off when steaming around them and sinks should be empty. Don't steam clean ovens, oven surfaces or grills
when hot, allow to cool to room temperature first.
Attaching and detaching handheld tools
Attach the chosen tool to the 360⁰
Hook tool onto 360⁰ connector.
connector before attaching both
In a hinge like manner, attach tool
connector and the tool
to 360⁰ connector until it clicks
to the handheld.
securely into place.
1
2
Push and twist the rotation collar to select the most suited cleaning angle for the chosen tool. There are four
positions on the rotation collar for easier cleaning.
To remove the tool from the 360⁰
Press the unlocking button
connector lift and push the clip on
on the 360⁰ connector and
the top of the tool (The tools get
pull to remove from handheld.
very hot during use, always allow
them to cool down before handling).
3
4
Reattaching handheld
To re-attach the handheld, insert
nozzle in to main body of the
steamer. Slide the handheld back
into the main body until it clicks into
place taking care not to trap the
power cord.
Taking care of your machine
Using Tools
Precision Tool
Soft Scrub Brush
Ideal for hard to access areas
Agitates dried on grease and
such as in corners or around taps.
grime and removes build up of
The concentrated jet of steam
dirt. Perfect for use on cookers
penetrates heavily soiled areas
and hobs, sinks, taps, worktops
removing soap scum in baths and
and more with minimal effort. The
shower enclosures and blasting
soft bristles tackle dirt and are
away grease and grime from hobs
ideal for more delicate surfaces.
and cookers.
The integrated scraper edge helps
remove stubborn dried on stains
without having to change the tool.
See the accessories section for additional tools and accessories.
IMPORTANT: Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks.
Don't leave water in the tank between uses, as this can effect the steamers performance, the tank should be emptied
and rinse with clean water after each use.
Emptying the tank
Grip the tank press the tank release
Pull the tab on the tank cap to open.
buttons and pull he water to remove.
Empty any excess water in the sink.
Rinse the tank with clean water and
replace cap, pushing firmly to close
before replacing the tank back onto
the steamer.
Hide quick links:
Advertisement
Table of Contents
