Hide thumbs Also See for CE2713:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Samsung CE2713

  • Page 1: Table Of Contents

    MICROWAVE OVEN CE2713 (WHITE/BLUE/BROWN) CE2713T (WHITE/BLUE/BROWN) SERVICE Manual CONTENTS MICROWAVE OVEN 1. Precaution 2. Specifications 3. Operating Instructions 4. Disassembly and Reassembly 5. Alignment and Adjustments 6. Troubleshooting 7. Exploded Views and Parts List 8. Schematic Diagrams...
  • Page 2: Precaution

    16. Always connect a test instrument's ground 10. Service technicians should remove their lead to the instrument chassis ground before watches while repairing an MWO. connecting the positive lead; always remove the instrument's ground lead last. Samsung Electronics...
  • Page 3 (Use a screwdriver.) 3. High voltage is maintained within specified limits by close-tolerance, safety-related components and adjustments. If the high voltage exceeds the specified limits, check each of the special components. Fig. 1-1. Discharging the High Voltage Capacitor Samsung Electronics...
  • Page 4: Specifications

    2. Specifications 2-1 Table of Specifications MODEL CE2713 / CE2713T ITEM TIMER 60 MINUTES POWER SOURCE 230V/50HZ, AC POWER CONSUMPTION MICROWAVE : 1,400W,GRILL : 1,100W OUTPUT POWER FROM100W TO 850W (7 LEVEL POWER INCLUDING DEFROST) (IEC-705 TEST PROCEDURE) OPERATING FREQUENCY...
  • Page 5: Operating Instructions

    INSTANT REHEAT 3-2 Features & External Views VENTILATION HOLES LIGHT VARIABLE COOKING POWER CONTROL KNOB GRILL TIMER KNOB METAL RACK COUPLER TURNTABLE ROLLER RING OPEN DOOR PUSH BUTTON SAFETY DOOR LATCHES DOOR INTERLOCK HOLES 193mm 306mm 368mm 489mm Samsung Electronics...
  • Page 6: Disassembly And Reassembly

    HIGH VOLTAGE TRANSFORMER secondary and filament terminals. It is extremely dangerous to work on or near these circuits with the oven energized. DO NOT measure the voltage in the high voltage circuit including filament voltage of magnetron. Samsung Electronics...
  • Page 7: Replacement Of Door Assembly

    1. Insertion depth of the thin metal plate should be 0.5mm or less. 4-3-4 Removal of Key Door & Spring Remove pin hinge from Door "E" Detach spring from Door "E" and key door. Door "E" Key Door Spring Samsung Electronics...
  • Page 8: Replacement Of Fuse/Drive Motor

    Switch remount it in the correct position with the coupler. Drive Motor Cover Base Plate 8. Connect all the leads to the drive motor. 9. Screw the drive motor cover to the base plate with a screw driver. Samsung Electronics...
  • Page 9 4-6-1 Removal of Control Box Assembly 1. Disconnect the connectors from the control box assembly. 2. Remove screws securing the control box Screw assembly. 3.Remove the knobs of the control box Ass'y. 4. Remove the screw securing the timer. Control Box Samsung Electronics...
  • Page 10: Alignment And Adjustments

    2. Isolate the magnetron from the circuit by disconnecting its leads. 3. A continuity check across the magnetron filament terminals should indicate one ohm or less. 4. A continuity check between each filament terminal and magnetron case should read open. Cooling Fins Samsung Electronics...
  • Page 11: High Voltage Capacitor

    Door Open Door Closed procedures. ¥ Primary switch 5. Confirm that the gap between the switch ¥ Monitor switch (COM-NC) housing and the switch actuator is no more than ¥ Secondary switch 0.5mm when door is closed. Samsung Electronics...
  • Page 12 5. After heating for 2 minutes, measure the water temperature in each beaker. 6. Microwave heat distribution rate can be calculated as follows: Minimum Beaker Temperature Rise Heat Distribution = X 100(%) Maximum Temperature Rise The result should exceed 65%. Cooking Tray Samsung Electronics...
  • Page 13: Procedure For Measurement Of Microwave Energy Leakage

    ; CENTRAL SERVICE CENTER 5-13-2 At least once a year have the microwave energy survey meter checked for accuracy by its manufacturer. Samsung Electronics...
  • Page 14: Troubleshooting

    2) Defective con- The oven lamp does not light and fan motor Replace the timer. tacts of timer does not operate. NOTE: Interlock monitor switch must be replaced when the fuse is blown out. Samsung Electronics...
  • Page 15 3) Too small a If a small amount of food is heated repeatedly over To increase the oven load or no a long period of time, microwave turns off during load, place a glass of load operation. water into the oven. Samsung Electronics...
  • Page 16: Unsatisfactory Cooking

    1) If there is no continuity in forward, direction the H.V.Diode is open. Replace. 2) If there is continuity in reverse direction, it's shorted. Fan motor Fan motor Check if the motor coil is open. Replace. does not rotate. Samsung Electronics...
  • Page 17: Exploded Views And Parts List

    7. Exploded Views and Parts List 7-1 Exploded Views Samsung Electronics...
  • Page 18 Exploded Views and Parts List 7-2 Main Parts List - CE2713 (WHITE/BLUE/BROWN) Ref. No. Parts No. Description/Specification Q'ty Remarks DE70-30116W PANEL-OUTER;SECC,T0.5,W351.7,L10;STS430,T0.5,W70,L70,-,3RD-W WHITE DE70-30135S PANEL-OUTER;SECC,T0.5,W351.7,L1014.7,BLUE,3RD,M1774B/XEU BLUE DE70-30135J PANEL-OUTER;SECC,T0.5,W351.7,L1014.7,BRN,- BROWN DE63-90035G CUSHION-RUBBER;DFA20,T2,W190,L100,BLK DE61-50323A BRACKET-UPPER;SECC,T0.6,W385,L205,M6245G DE61-30008A SUPPORTER-HEATER;ALUMINA,T12,CE745G DE61-70060A SPRING-PLATE;SK-5,T0.5 DE47-00004A HEATER-GRILL;SHG-2733E,-,-,-,-,-,-,-,230V1080W DE60-40009B WASHER-TEFLON;SLOT,ID22.2,OD28,T1.2,TEFLON DE63-20017A GASKET-HEATER;BRASS,T1.5,OD30.5,ID22.5...
  • Page 19 DE61-30008A SUPPORTER-HEATER;ALUMINA,T12,CE745G DE61-70060A SPRING-PLATE;SK-5,T0.5 DE47-00004A HEATER-GRILL;SHG-2733E,-,-,-,-,-,-,-,230V1080W DE60-40009B WASHER-TEFLON;SLOT,ID22.2,OD28,T1.2,TEFLON DE63-20017A GASKET-HEATER;BRASS,T1.5,OD30.5,ID22.5 DE61-50576A BRACKET-HEATER;STS430,T0.5,W70,L70,-,3RD-W DE74-80062A STOPPER-HEATER;SECC,T0.8xW70xL70,-,-,-,3RD-W DE39-20058L ASSY POWER CORD;230V50HZ,-,GRY,CE2713/XEF,1.5SQ DE65-20014A CABLE CLAMP;DA-6N,NY-66 P-CORD DE39-40409A WIRE HARNESS-E;230V50HZ,M9G45,CTW H/EART DE71-60451A COVER-BACK;SECC,T0.5,W115,L332,-,3RD-0.7, DE39-00037A WIRE HARNESS-A;230V50HZ,-,-,CE2713(INRUSH),AMFO DE96-00008A ASSY NOISE FILTER;SN-3WEB,250V10A,3W INRUSH D DE71-60467A COVER-BLOWER;PP,-,-,-,-,3RD-0.7 DE96-00031A ASSY MOTOR-FAN;SMF-3RDEA,230V50HZ,2400RPM,M1733...
  • Page 20 ASSY CONTROL-PANEL;230V50HZ,CE2713-B/XEG,BLUE,3RD-S2 BLUE (CE2713) DE94-00128M ASSY CONTROL-PANEL;230V50HZ,CE2713T-B/XEG,BLUE BLUE (CE2713T) DE94-00128G ASSY CONTROL-PANEL;230V50HZ,CE2713-M/XEG,D/BRN,3RD-S2 BROWN (CE2713) DE94-00128N ASSY CONTROL-PANEL;230V50HZ,CE2713T-M/XEG,D/BRN BROWN (CE2713T) 7-5 Body Latch Parts List - CE2713/CE2713T (WHITE/BLUE/BROWN) Ref. No. Parts No. Description/Specification Q'ty Remarks DE66-40001C LATCH-BODY;PP(FB53WH),-,39.2G,NTR,-,3RD-W MW5592W 3405-000178 SWITCH-MICRO;250V,15A,200gf,SPST-NO 3405-000175 SWITCH-MICRO;250V,15A,200gf,SPST-NO...
  • Page 21: Standard Parts List

    CVT-TCO DE60-10098A SCREW-ASSY TAP TITE;PH,TC,M4X8,SWRCH18A,ZPC2,GLD,W D-MOTOR DE60-10098A SCREW-ASSY TAP TITE;PH,TC,M4X8,SWRCH18A,ZPC2,GLD,W MGT-TCO DE60-10122A SCREW-TAP TH;TAP,TH,2-4X8,FE,FN CV-CEILING DE60-10122A SCREW-TAP TH;TAP,TH,2-4X8,FE,FN P-OUTER DE60-20063A BOLT-FLANGE;M4,10,ZPC3,YEL,MSWR H/LOWER DE60-20063A BOLT-FLANGE;M4,10,ZPC3,YEL,MSWR H/UPPER DE60-30016A NUT-FLANGE;M4,MSWR10,-,-,-,-,-,-,-;PH,TC,M4X8,SWRCH18A,ZPC2,GLD,W DE60-10012A SCREW-TAP TITE;TH,+,3,M4,L10,SWR10,ZPC2,TOOTH DE60-10069A SCREW-TAP TH;TH,M4,L10,FRFZY RELAY DE60-10072A SCREW-TAP TH;TH,M4,L16,FEFZY,2-SLOT TIMER Samsung Electronics...
  • Page 22: Schematic Diagrams

    WHT : WHITE BLU : BLUE COOK OFF RED : RED ORG : ORANGE BLK : BLACK YEL : YELLOW MAGNETRON HIGH VOLTAGE DIODE TO CHASSIS HIGH VOLTAGE CAPACITOR H.V.FUSE SYMBOL COLOR BROWN BLACK BLUE HIGH VOLTAGE TRANSFORMER Samsung Electronics...

This manual is also suitable for:

Ce2713t

Table of Contents