Olympus LS-P2 User Manual page 95

Connecting/disconnecting a Bluetooth device
• [Connecting!] appears in the display,
and the connecting process starts.
[Connection Done] appears when the
process has finished.
• The Bluetooth indicator on the screen
lights and you become able to use the
connected device.
11 Press the STOP ( 4) button to exit
the menu screen.
NOTE
• Recording, playback, and other
operations are not possible during the
pairing process.
• Only one Bluetooth device can be
connected by performing pairing
setting once. Multiple devices cannot
be paired simultaneously. Configure
the connection settings separately for
each device.
• If an operation such as turning the
power off is performed after pairing
with a Bluetooth device completes,
the Bluetooth connection will be
disconnected. To connect again,
perform this [Connection] operation.
• If the Bluetooth connection is
disconnected from the Bluetooth
device, the Bluetooth function of
the voice recorder is turned off
automatically.
• If communication become unstable
after the connecting is completed,
the voice recorder may enter the
connection wait state.
• If the Bluetooth connection wait state
is entered while recording or playback
is in progress, the recording or playback
operation is interrupted. Check the
status of the voice recorder while
recording or playback is in progress.
• If Bluetooth is disconnected while
recording or playback is in progress, the
recording or playback operation stops.
5
EN
95