Pausing/Resuming Recording; Quickly Checking A Recording - Olympus LS-P2 User Manual

Recording

Pausing/resuming recording

Press the REC ( s) button during
1
recording.
• Recording pauses, and the blinking
message [75 PAUSE] appears in the
display.
• Recording is stopped automatically
after being paused for at least 60
minutes.
Press the REC ( s) button again
2
while recording is paused.
• Recording resumes from the position it
was paused at.

Quickly checking a recording

Press the `OK button during
1
recording.
• Recording ends, and the file just
recorded is played.
Recording settings
Various recording settings are available,
letting you tailor recording to different
recording conditions.
[Rec Level]
Sets the recording level.
(☞ P.55)
Sets the correction method
[Limiter]
according to the sound input
(☞ P.56)
during recording.
[Rec Mode]
Sets the recording sound quality.
(☞ P.56)
[Zoom Mic]
Sets the built-in stereo
(☞ P.57)
microphone's directivity.
Reduces humming sounds
[Low Cut Filter]
from equipment such as
(☞ P.58)
air-conditioners or projectors.
Selects whether or not the built-
[Mic Select]*
in center microphone is to be
(☞ P.58)
turned on or off.
[VCVA] Sets the trigger level for voice-
(☞ P.59)
activated recording (VCVA).
[V-Sync. Rec]
Sets the trigger level for voice-
(☞ P.60) synchronized recording.
Used to select one of multiple
preregistered templates of
recording settings. When
[Rec Scene] selected, each template enters
(☞ P.31)
several settings tailored to a
particular recording location
or condition all in a single
operation.
* LS-P2 model only
2
EN
29