Trimming A File [Trimming] - Olympus LS-P2 User Manual

Trimming a file [Trimming]

A file can be trimmed down to just the required portion and then re-saved.
LS-P2 model only
NOTE
• Only PCM-format file recorded on the
voice recorder can be trimmed.
Before performing the file
1
trimming operation, first
select the file you want to trim
(☞ P.22).
Press the MENU/SCENE button
2
while the voice recorder is in stop
mode.
Press the `OK button to move
3
the cursor into the list of setting
items.
Press the + or – button to select
4
[Trimming].
Press the `OK button.
5
Press the `OK button to play the
6
file to the desired trimming point
(☞ P.36).
• You can change the playback speed
(☞ P.41), and fast-forward/rewind
(☞ P.37).
Press the F2 button at the
7
position where you want to start
trimming.
TIP
• Playback continues while [Start]
position is set and as with usual
playback, changing the playback
speed and fast-forward/rewind can
be performed and you can quickly
advance to the [End] position.
• When the end of the file is reached
while the [End] position is not set,
that position becomes the end
position of trimming.
• Writing an index mark/temp mark
at the start point and end point
beforehand is handy (☞ P.45).
Press the F2 button again at the
8
position where you want to end
trimming.
4
EN
81