Troubleshooting - DèLonghi ECAM23.260 Manual

Hide thumbs Also See for ECAM23.260:
Table of Contents

Advertisement

TROUBLESHOOTING

Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM
The coffee is not hot
The coffee is thin or not creamy
enough
The coffee is delivered too
slowly or a drop at a time
Coffee does not come out of one
of the spouts
The milk does not come out of
the milk spout
The milk contains large bubbles
and squirts out of the milk spout
or there is little froth
The appliance does not come on It is not plugged into the mains socket
The infuser cannot be extracted
POSSIBLE CAUSE
The cups were not preheated
The infuser has cooled down because
2/3 minutes have elapsed since the last
coffee was made
The coffee is ground too coarsely
The coffee is unsuitable
The coffee is ground too finely
The spouts are blocked.
The milk container lid is dirty.
The milk container lid is dirty
The milk is not cold enough or is not
semi-skimmed
The froth adjustment dial is incorrectly
adjusted.
The milk container lid or froth
adjustment dial is dirty
The main switch (A7) is not turned on
The appliance has not been turned off
correctly
SOLUTION
Warm the cups by rinsing them with hot water (N.B.
you can use the hot water function)
Before making the coffee, warm the infuser by per-
forming a rinse (see "Tips for a hotter coffee", page
11)
Turn the grinding adjustment dial one click anti-
clockwise towards "1" while the coffee mill is in ope-
ration (fig. 10). Continue one click at a time until cof-
fee delivery is satisfactory. The effect is only visible
after delivering 2 coffees (see the section: "adjusting
the coffee mill" on page 11)
Use pre-ground coffee for espresso coffee makers
Turn the grinding adjustment dial one click clockwise
towards "7" while the coffee mill is in operation (fig.
10). Continue one click at a time until coffee delivery
is satisfactory. The effect is only visible after deli-
vering two coffees. (see the section "adjusting the
coffee mill" on page 11)
Clean the spouts with a toothpick (fig. 26B)
Clean the milk container lid as described in the sec-
tion "Cleaning the milk container"
Clean the milk container lid as described in the sec-
tion "cleaning the milk container"
Use skimmed or semi-skimmed milk at refrigerator
temperature (about 5°C). If the result is not as you
wished, try changing brand of milk
Adjust following the instructions in the section "ma-
king drinks with milk"
Clean the milk container lid and dial as described in
the section "cleaning the milk container"
Plug into the mains socket
Push the main switch (fig. 3)
Turn the appliance off by pressing the
(pag. 10)
19
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents