Table of Contents
Advertisement
DISASSEMBLE THE REFRIGERATOR DOORS
1. With the door opened, remove the Top Table cap (
head screwdriver, and close the door. Remove the 3 screws
holding down the Top Table and remove the Top Table(
2. Disconnect the electrical connector
(
) above the upper right door hinge and the 3
3
electrical connectors (
) above the
4
upper left door hinge.
Disconnect the water tube (
pulling the tube fitting (
) apart as
6
shown in the picture.
3. Remove the 3 hex head bolts(
to the upper left and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver, remove the
ground screw(
) found attached to the upper
8
left and right door hinges. Remove the upper left
and right door hinges(
).
9
4. Lift the door straight up to remove.
5. With a Philips head screwdriver, remove the 2
screws (
) attached to the lower left and right
10
door hinges.
With a Allen wrench(5mm), remove the 2 hex
head bolts (
) attached to the lower left and right
11
door hinges.
Remove the lower left and right door hinges(
• Be careful not to missplace the hinge cap because it can be easily taken off.
) with a Flat
1
2
4
) by
5
Red Clip
(1/4")
) found attached
7
9
10
).
12
).
1
5
5
6
6
8
7
12
11
Setting Up _9
2
3
Hide quick links:
Advertisement
Table of Contents
