Siemens Gigaset C590 User Manual page 48

Using a handset as a room monitor
If you accept an incoming call, the room
monitor is suspended for the duration of the
call, but the function remains activate.
If you deactivate, then reactivate the hand-
set, the room monitor remains activated.
Warning!
u
Always check the operation of the
room monitor before using it. For
example, test its noise sensitivity.
Check the connection if you are
diverting the room monitor to an
external number.
u
When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the base/charging cradle.
This ensures that the battery does not
run down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
É
¢ ¢
v
Room Monitor
¤
Change multiple line input:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press the display key
ö
) or enter it directly.
Internal number: Select the display key
¢
§Change§
Select the handset or Call All
to call all registered handsets
¤
§Save§
Press to save the settings.
In idle state, the destination number or
the internal destination number displays.
46
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i
INT 1
Off
Changing the set destination
number
v
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
(
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle state, press the display key
deactivate the room monitor mode.
Deactivating the room monitor
remotely
Prerequisite: The phone must support tone
dialing and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The call ends immediately and the room
monitor function deactivates. There will be
no further room monitor calls.
To reactivate the room function with the
¢
§OK§
.
same phone number:
¤
Turn on the activation again and save
with
à V
07:15 am
Á
Oct 22
Room Monitor
9725551234
Options
É
¢ ¢
Room Monitor
¢
page 46).
¢
§Save§
( page 46).
§Off§
to