Using The Phone; Control Key - Siemens Gigaset C590 User Manual

Using the phone

Control key

Below, the side of the control key that you must press in
the respective operating situation is marked in black
(top, bottom, right, left, centre), e.g. v for "press right on the
control key" or w for "press the center of the control key".
The control key has a number of different functions:
When the handset is in idle state
s
v
u
t
In the main menu
t, s, v or u
In submenus and lists
t / s
In input fields
Use the control key to move the cursor up t, down s, right v or left u.
Press and hold v or u to move the cursor word by word.
During an external call
s
u
t
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u
In idle state the key opens the main menu.
u
In submenus, selection and input fields the key takes on the function of the dis-
play keys
Please note
These instructions demonstrate the main menu being opened by pressing the
right of the control key and functions being actuated by pressing the appropri-
ate display key. However, if you prefer, you can use the control key as described
above.
Open the directory.
Open the main menu.
Open the list of handsets.
Call up the menu to set the call volume (
Navigate to the required function.
Scroll up/down line by line.
Open the directory.
Initiate an internal consultation call.
Adjust the speaker volume for an earpiece and speaker mode.
§OK§ §Yes§ §Save§ §Select§
, , ,
¢
§Change§
or .
Using the phone
page 49) of the handset.
19