Table of Contents
Advertisement
B. Clearances to Combustibles
When selecting a location for the appliance it is important
to consider the required clearances to walls. See Figure
3.4 and Figure 3.5.
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be lo-
cated out of traffi c and away from furniture and draperies.
E
1 IN.
A
45°
Inches
Millimeters
Figure 3.4 Appliance Locations RED40
Heat & Glo • RED40-NNN,RED40-NM, RED40-LM, RED40-NNN, RED40ST-LM, RED40ST-NM Installation Manual • 2155-975 Rev. E • 12/14
10
A
1 IN.
B
C
TOP VENT
ONE 90° ELBOW
A
B
60-3/8
50
1533
1270
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
It is important to follow the framing and fi nishing instruc-
tions step by step to ensure proper placement of fi replace
in the surrounding framing/fi nishing materials. For addi-
tional information and considerations for the active con-
vection technology in regards to appliance location and
framing, see Section 6.
B
ALCOVE
INSTALLATION
Note: Consider installation of the active con-
vection blower when determining appliance
location. See Section 6.C for more detailed
information.
TOP VENT
ONE 90° ELBOW
B
C
D
85-3/8
See Section D.
Figure 5.6 & 5.7
2168
D
F
E
F
24-1/8
18-3/4
613
476
Advertisement
Table of Contents
