Adjusting Airflow Direction; Adjusting Airflow Direction For Multiple Indoor Units Using Single Remote Controller (Wired) - Panasonic S-12MT2U6 Operating Instructions Manual

One outdoor unit and eight indoor units
No display
Unit No.
1–1
6

ADJUSTING AIRFLOW DIRECTION

4-Way Cassette 36" x 36" (Type U2)
This air conditioners are equipped with auto flaps.
You can set the airflow direction to a specific angle or to the sweep mode using the remote
controller.
• The air outlet flap can be easily removed and washed with water.
• Be sure to always stop operation before removing the flap.
• After washing with water, allow it to dry, and then remount it with the arrow facing outward.
Ceiling (Type T2)
A. Vertical directions (automatic)
This air conditioner is equipped with an auto flap. You can set the airflow direction to a specific
angle or to the sweep mode using the remote controller. (Refer to the description of the remote
controller.)
B. Horizontal directions (manual)
The horizontal airflow direction can be adjusted manually by moving the vertical vanes to the
left or right.
ADJUSTING AIRFLOW DIRECTION FOR MULTIPLE
INDOOR UNITS USING SINGLE REMOTE CONTROLLER
(WIRED)
• If multiple indoor units are connected to a remote controller, the airflow direction can be set for
each indoor unit by selecting the indoor units (see the operation below).
• To set the airflow for individual units, press the UNIT button. Display shows the indoor unit
number under group control. Set the airflow direction for the indoor unit that is shown on the
display.
• Each time UNIT is pressed, the indicator changes in the order shown below.
• When nothing is displayed, you can make the setting for all indoor units in one operation.
• The unit number is displayed as Outdoor Unit Number–Indoor Unit Number. It varies
depending on the number of units under group control.
Unit No. Unit No. Unit No.
1–3
1–2 1–8
Do not move the flap with your hands.
Do not move the flap with your hands.
Two outdoor units and four indoor units
Unit Unit
No
No. No.
display
1–1 1–2
Unit Unit Unit Unit
No. No. No. No.
1–3 1–4 2–1 2–4