Aux In Operation; Care And Maintenance - Jensen CD-475 User Manual

9. To cancel program play, press the STOP
or open the CD DOOR in stop mode. The PROGRAM INDICATOR will go off.
This CD features an AUX-IN jack for connecting your iPod, MP3 player or other digital music
player.
1. Connect the headphone jack of your external device to the AUX IN jack located on the back of
this CD player (The connection cable is not included).
2. Turn on the CD player and it will enter the AUX function mode once an external device is
plugged into the AUX IN jack.
3. Start to play your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on your CD player and the external device.
5. Turn off your iPod, MP3 player and etc. when finish listening. Turn the CD player off and
unplug the AUX IN jack.
Remark: Once the AUX IN jack is plugged, the CD player will automatically enter the AUX mode
when the FUNCTION SWITCH is in CD mode. Remember to disconnect the cable from the unit
after use in order to be able to listen to the CD player again.
1. Children should be supervised when using this appliance.
2. Never wrap the earbuds lead around any animal or person. Special care should be taken with
long wires.
3. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
6. If drop-outs or interruptions occur in the music during CD play, or if the
CD fails to play at all, its bottom surface may require cleaning. Before
playing, wipe the disc from the center outwards with a good soft
cleaning cloth.
BUTTON twice while program playback is running

AUX IN OPERATION

CARE AND MAINTENANCE

E-10