Table of Contents
Advertisement
3.
Disc information (total number of tracks) will appear on the LED DISPLAY.
4.
Press PLAY/PAUSE
light steadily.
5.
While playing, press the PLAY/PAUSE
will flash. Press PLAY/PAUSE
6.
Adjust the VOLUME CONTROL KNOB to the desired volume level.
7.
Press STOP
8.
To turn off the CD player, slide the FUNCTION SWITCH to "OFF".
NOTE: If skipping occurs during CD play, try turning the volume down.
Do not open the CD DOOR when a CD is playing.
REPEAT MODE
Repeat 1
When the REPEAT BUTTON is pressed once, the REPEAT INDICATOR will light and blink
continuously. The current track will be repeated until it is interrupted.
Repeat All
When the REPEAT BUTTON is pressed twice, the REPEAT INDICATOR will light steadily. The
whole disc will be played continuously.
To Cancel Repeat Function: Press the REPEAT BUTTON until the REPEAT INDICATOR is off.
SKIP AND SEARCH MODE
1.
During Play or Pause mode, tap the SKIP FORWARD " " or SKIP BACKWARD " "
BUTTON to go to the next track or go back to the beginning of the current track.
2.
During play mode or Pause mode, press and hold the SEARCH FORWARD " " or SEARCH
BACKWARD " " BUTTON to search within the current track with audible high speed
playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1.
Press the PROGRAM BUTTON once. "01" in the LED DISPLAY and PROGRAM INDICATOR
both will flash.
2.
Press the SKIP FORWARD " " or SKIP BACKWARD " " BUTTON to select the track to be
programmed.
3.
Press the PROGRAM BUTTON again to store the selection. The LED DISPLAY will advance to
"02" and flash to prompt for the next input.
4.
You may repeat steps #2 to #3 to program up to 20 tracks. As soon as you have entered the
20th track, the LED DISPLAY will automatically show the programmed tracks one by one in their
correct sequence starting from the first.
DISPLAY and PROGRAM INDICATOR will both flash.
5.
Press the PLAY
will light. Press the STOP
6.
Normally all the programmed tracks will be played through once and then stop. However, you
may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks in the
program (Repeat All). You may also tap SKIP Forward " " BUTTON to go directly to other
tracks ahead or use SKIP BACKWARD " " BUTTON to go back to previous track(s) during
program play.
7.
To review/edit the programmed tracks during play, press the STOP
PROGRAM BUTTON, "01" will show in the LED DISPLAY and PROGRAM INDICATOR will
both flash. If you do not want to change any track in the program, press STOP
8.
To edit a programmed track, use the SKIP FORWARD " " or SKIP BACKWARD " "
BUTTON to select a new track and press PROGRAM BUTTON to confirm. To skip forward,
press PROGRAM BUTTON until you reach the program number whose track you want to
change.
BUTTON to start playing the CD, the PLAY/PAUSE INDICATOR will
BUTTON again to resume playing.
BUTTON to stop playing.
BUTTON to complete and start program play. The PROGRAM INDICATOR
BUTTON to stop.
BUTTON to pause, the PLAY/PAUSE INDICATOR
At the end of program review, "01" in the LED
E-9
BUTTON and then the
BUTTON.
Hide quick links:
Advertisement
Table of Contents
