Manual Buttonhole - Husqvarna Viking Jade 20 User Manual

Manual Buttonhole

To sew a buttonhole longer than 25mm, use the manual
buttonhole foot C.
1. Lower the buttonhole lever and presser foot. Press the
start/stop button or the foot control to start sewing
while pushing the buttonhole lever away from you until
the machine starts sewing a straight stitch backwards. Sew
until you reach the desired length of the buttonhole.
2. Pull the buttonhole lever towards you until the machine
starts sewing the first column forwards.
3. When the column stitching has reached your desired
length, push the buttonhole lever away from you until the
machine starts sewing a straight stitch backwards.
4. Pull the buttonhole lever towards you until the machine
starts sewing the bar tack and second column forwards.
5. When the columns are aligned, push the buttonhole lever
away from you until the machine starts sewing the bar
tack. The machine will sew a few tie-off stitches and stop
automatically.
6. Use the seam ripper to carefully open the buttonhole.
Depending on the style of buttonhole selected, the sewing
sequence will differ, see illustration.
1
1
1
1
1
Sewing sequences for buttonhole stitches 0 and 30–33.
3 Sewing
2 3 4
2 3
2 3
2 3
2 3
5
4
4
4
4
35